SUSTAINABILITY

We strive to run our business in an ethical way. This means taking responsibility for our actions throughout the value chain and for our most important stakeholders – the children who play with our products.

Products you can trust
Our sustainability priorities are defined by what we consider material for us as a company with children as the end-consumers: making sure that our customers can trust our products and our marketing.

Our customers should be able to trust that toys bought in our stores are safe for their children to play with, meet all applicable national and international legislation and have been produced under responsible conditions for factory workers. In addition, when children come in our stores or browse our catalogues, they should not be exposed to products or marketing that could affect them negatively. For this reason, we avoid stereotyping, sexualisation and products that promote gambling, for example.

OUR SUSTAINABILITY PRIORITIES

Important priorities across our supply chain are:

Our employees and the communities we are part of are equally important to our business. For this reason, we also focus on:

SAFE PLAY

Children have a right to safe play. The safety of the children who play with our products is at the very top of our priorities.

We work systematically to integrate safety in a product’s entire lifecycle. All our products are tested thoroughly to make sure they are safe to play with, and they naturally always comply with relevant EU and national safety regulations. In the case of chemical content and for some toys aimed at children under the age of three, we set ourselves higher standards than those of the EU Toy Safety Directive. We communicate with new suppliers to introduce them to our product safety requirements and ensure they have the necessary knowledge to produce safe products.

We help support good and meaningful safety regulations by collaborating with the European Committee for the Standardisation of Toys (CEN TC 52) and the Danish Standardisation Agency. We also encourage market surveillance by relevant authorities to ensure a level playing field.

Chemical safety – our promise

We make sure our toys do not contain chemicals that are harmful to children.

All ingredients are carefully evaluated and must be approved by our product safety experts before toys are allowed on the shelves of our BR stores.

  • None of our toys contain phthalates, which are sometimes used in toys to make mainly PVC softer and more flexible. Three phthalates are banned in all toys due to concerns about hormonal effects, while three other phthalates are banned in very small toys that children may put in their mouth. In this area, we go above and beyond legal requirements by removing all phthalates from our toys.
  • We test our products to strict levels for formaldehyde.
  • Our crayons, paints, play doughs and play cosmetics never contain preservatives known to cause allergy.
  • We do not use propylparaben, butylparaben, isopropylparaben or isobutylparaben in any of our products, because they are believed to influence hormones.
  • None of our products contain more than 0.1% Substances of Very High Concern (SVHC).
  • None of our drinking bottles or lunch boxes contain BPA
  • When it comes to liquids and powders that a small child may eat, our toys contain materials safe enough for a child to eat without developing noteworthy symptoms.

Mechanical product safety – testing example

Example of mechanical product safety tests: The BR stacking soldier is intended for children from 18 months of age and has been subject to mechanical durability tests based on internationally recognised test methods.

testing_br_soldier_tension-test

Tension test

Toys can suffer heavy-handed treatment by energetic children. The BR soldier has to withstand a tension test to ensure it is strong enough to withstand pulling by children. The BR soldier is attached to a pull force gauge to determine the ability of the elastic band to withstand pulling for 10 seconds at a force of 22 pounds.

item_drop_test_jpg

Item drop test

Another way we determine the robustness of the BR soldier is through an item drop test. The BR soldier is dropped 10 times from a height of 140cm. No small parts should break off or sharp edges be formed due to the drop.

soaking_test_jpg

Soaking test

Small children often put toys in their mouth. This is why the BR soldier has to meet the requirements of a soaking test. It should be able to become wet and dry again repeatedly, without breaking, becoming unglued or fading in colour. We submerge the BR soldier in water, pull it out again, shake off excess water and keep it at room temperature. No small parts should come off after repeating the test cycle four times.

c_testing_product_02_jpg

Colour fastening test (3M tape test)

The paint on the BR soldier should not peel off during play. This is checked through a colour fastening test. We apply and remove adhesive tape to ensure the paint is firmly attached to the BR soldier.

impact-test

Impact test

Small inquisitive children often examine things by putting them in their mouth. Using an impact test, we make sure the BR solider can withstand pressure without small parts breaking off. The head and body of the BR soldier are struck by a 1kg weight at a height of 15cm.

SAFE AND RESPONSIBLE WORKING CONDITIONS IN OUR SUPPLY CHAIN

We take our responsibility to respect human and labour rights seriously. Through our social compliance programme, we work continuously to ensure our products are made under responsible conditions with respect for international human rights and labour standards. Our products are only produced in factories that have been audited in accordance with our social compliance standards.

We do not own any factories ourselves but collaborate with our suppliers to ensure the people who make our toys have safe, humane and healthy working conditions, where their rights are respected. As part of our human rights policy, we recognise our responsibility to pay attention to younger workers and migrant workers.

We monitor our suppliers’ performance via social audits, where we screen factory working conditions.

Our use of third party audits

Factory performance and progress audits are primarily conducted by third party auditing bodies, such as the ICTI Care ProcessSA8000 Certification and the Business Social Compliance Initiative (BSCI).

factory-certifications

Sourcing from Asia

Our key sourcing markets are China and several other Asian countries. Around 70% of our product volume comes from these markets, where the biggest toy producers in the world are located.

The toy industry is very labour intensive, contributing to job creation and substantial economic growth. At the same time, there are several challenges related to labour standards and human rights. By concentrating our efforts on our Asian sourcing countries, we believe we can have the biggest impact on driving factory improvements.

factory-geographical-distribution

ETHICAL PRODUCT OFFERING AND MARKETING

It is through our products and marketing that we engage most directly with children and their families. Children experience our marketing and product offering when they browse our catalogues and visit our stores.

Ethical product offering
As children are our target group, we have a great responsibility to ensure an ethical product offering and marketing. Customers should feel confident that children will not be exposed to products that may affect them negatively, for example by sending inappropriate signals or causing emotional or physical harm. For this reason, we developed our Ethical Product Offering Policy in 2015 to define products that are unsuitable for our assortment.

Responsible marketing

Our Ethical Product Offering Policy also covers marketing-related issues. However, because we recognise that marketing communications can influence children’s behaviour, we have set ourselves a goal to develop a separate Responsible Marketing Policy. We wish to ensure our marketing promotes safe, inclusive and active play.

Some concrete examples of our positions

Safe play
We offer personal protection equipment along with products such as bikes, skateboards and roller skates. We also make sure that the use of relevant personal protection equipment is shown when promoting these products.

Tobacco and alcohol
We do not offer products that can be perceived as promoting the use of tobacco or alcohol. As far as possible, this also applies to the reproduction of related logos on, for example, football trading cards and model vehicles.

Right impression of product features
We promote products in a way that gives children the right impression of product features. This avoids disappointing the children.

Gender, marketing and product offering

In our experience, girls and boys often like to play with many different toys across traditional and stereotypical gender categories. This is why we always strive to give our customers the opportunity to buy and play with the toys of their choice regardless of gender.

This principle is also reflected in our marketing, where we work to portray children playing together with products across categories, both in our catalogues and when we produce other marketing material.

We also make efforts to avoid stereotyping in our store design. In all BR stores and new TOYS”R”US stores, the sections are not categorised according to gender but according to product categories such as interactive play, creativity and learning, baby and toddler and so on.

Although we work continuously to ensure we portray modern ways of playing without stereotyping, we acknowledge that this takes time and that things do not change overnight.

ENVIRONMENT

We are committed to minimising our overall impact on the environment while striving to promote environmentally responsible behaviour among our employees, suppliers and business partners. We operate in a global context where we need to focus our environment-related efforts on those areas where we can make the most positive change. Our biggest direct environmental impact comes from our distribution set-up and retail stores, because we do not own any manufacturing or production sites. Our environmental policy focuses on the following six priority areas where we believe we can bring about the most positive change: Energy and emissions, product packaging, waste, transportation, product suppliers, and investments and purchases.

Energy and emissions

We aim to reduce our energy consumption and emissions in our stores and distribution centre.

Product packaging and material

We integrate environmental concerns in the packaging of our own brands, where we have the biggest influence on product design. We focus on reducing packaging materials and using sustainable packaging material. We also use FSC® wood in our wooden products.

Waste

We work to optimise our waste management in terms of sorting and volume. As part of these efforts, we have switched to more environmentally-friendly, longer-lasting banderole foil in our distribution centre, reducing consumption by 50%.

We have also reduced packaging for many of our web order deliveries by using plastic bags instead of cardboard. This reduces the amount of packaging waste. In addition, the plastic bags are made from recycled material – 10% from post-consumer waste and 90% from industrial waste. We currently deliver 25% of our web orders in recycled plastic bags.

EU has an ambition to reduce plastic bag consumption by 50% before 2025. We welcome this, so in 2016/2017, we decided to start charging for our plastic bags. The decision will be implemented in the second half of 2017. We hope this will encourage our customers to consider other alternatives before they buy a plastic bag – or reuse the bags they buy. As part of the initiative, we have also decided that, in the future, we will only sell bags made from 100% recycled material – 80% from postconsumer waste and 20% from industrial waste.

Transportation

Most of the products we sell are manufactured in Asia. For this reason, we continue to optimise transportation from the factories in Asia to our distribution centre in Denmark. For example, we always try to avoid air freight.

Factories

As part of our social compliance programme, we conduct factory audits. Our priority is social conditions. However, if during a factory audit we observe violations of environmental legislation, we will investigate them as well. We also focus on the use of chemicals in production, both from the perspective of employee health and safety and of the environment.

Investments and purchases

We have begun re-evaluating existing contracts for products and services that we buy but do not re-sell. The aim is to ensure the highest possible quality, that costs and consumption are reduced and that environmental solutions are implemented whenever possible.

Responsible own brands

We have integrated environmental concerns in the development of new own branded products. Packaging is made of recycled cardboard with a waterbased UV coating that ensures quality and environmental standards are met. In addition, our series of own branded wood products is made entirely of FSC®-certified wood. In 2016/2017, we sold more than 180,000 of these products.

Implementing LED lighting in our warehouse and stores

One of our most important steps to reduce energy consumption and emissions is the switch to LED lighting in our own facilities.

At our distribution centre, this has saved approximately 710,000 kWh, corresponding to 300 tonnes of CO2 a year. At our BR stores, we have saved approximately 4.4 million kWh, corresponding to a CO2 reduction of 1,800 tonnes. In 2016/2017, we introduced LED lighting in the remaining TOYS”R”US stores that still used traditional lighting. All but one of our TOYS”R”US stores now use LED lighting.

ENGAGING WITH OUR COMMUNITY AND STAKEHOLDERS

We engage with our stakeholders and the wider community. Our ongoing goal is to improve our business and become more responsible. We welcome feedback from our customers and other stakeholders.

Support and collaboration

We believe that most challenges are best faced together. This is why we support initiatives that promote responsible business and collaborate with relevant organisations that work for responsible manufacturing practices at industry level or for good and meaningful safety regulations. In addition to the initatives below we also collaborate with the European Committee for the Standardisation of Toys (CEN TC 52) and the Danish Standardisation Agency.

UN Global Compact and Sustainable Development Goals

As part of our commitment to responsibility, we have been a signatory of the UN Global Compact since 2010. We work with the UN Global Compact principles at all stages of our value chain. See the link between the UN Global Compact, our sustainability priorities and our business model here.

UN, UNICEF and Save the Children have developed the Children’s Rights and Business Principles that guide us in prioritising our sustainability activities throughout our value chain. We focus primarily on the following principles:

  • Respect and support children’s rights
  • Contribute to the elimination of child labour
  • Provide decent work for young workers, parents and caregivers
  • Ensure that products and services are safe
  • Use marketing and advertising that respect and support children’s rights

We support the UN Sustainable Development Goals. Our responsibility focus areas are largely aligned with those goals where we believe we can make the most meaningful contribution. In particular:

BR and Red Cross

In 2016 we launched a partnership between BR and the Red Cross is called “Play For Life”. The partnership is based on our recognition that play is important to all children – but that play is often challenged when disasters hit, when children have to flee from their home or when they grow up in deprived families. In these situations, the Red Cross uses play to improve the children’s well-being.

BR supports these activities through the sale of a Red Cross teddy, where all proceeds go to the Red Cross and their work with vulnerable children in the Nordic countries and the rest of the world. The partnership raises awareness of the importance of Red Cross’ work for vulnerable children.

The partnership currently involves BR stores and Red Cross organizations in Denmark, Sweden, Norway and Finland. The partnership agreement runs for 3 years.

Find more information about the partnership on our BR-web shops in Denmark, Sweden, Norway and Finland.

TOP-TOY A/S | Delta Park 37 | DK-2665 Vallensbaek Strand | Denmark | +45 4616 3656
Cookie Policy | Terms and conditions |©TOP-TOY A/S 2016 All rights reserved
TOYS“R”US, the TOYS“R”US & Star design and the Giraffe design are registered trademarks of Geoffrey, LLC. TOP-TOY A/S is a licensee of Geoffre y, LLC.